wanhaorefractory

When the CaF2 content in slag is less than 9%, with the increase of CaF2 content, desulfurization degree goes up. When the CaF2 content in slag is between 9% and 10%, desulfurization degree reaches a maximum. When the CaF2 content in slag is more than 10%, with the increase of CaF2 content, desulfurization degree goes down, this is from the perspective of thermodynamics. From the perspective of molecular theory, the desulfurization reaction of slag is: CaO2+[S]=(CaS)+[O], with the process of desulfurization reaction, solid CaS will be formed at the slag level, which will stop desulfurization reaction and makes liquid phase quantity decrease. CaF2 is good for the destruction of solid CaS, which increases liquid phase quantity and improves desulfurization condition, but when the content of CaF2 is enough to stop solid CaS from forming, more CaF2 will make the CaO in slag diluted, which will decrease the effective concentration of CaO and bad for desulfurization. ...

1.Not too rusty. If the steel scrape is too rusty, it will cause more slag, which is bad for furnace lining and production capacity; 2.Not too dusty. If there is too much dust on the steel scrape or at the steel scrape site, more slag will be caused too, the scrape site is better to be clean. 3.Not too big. Higher temperature and longer time will be needed for melting if the steel scrape is too big, it’s better to cut the big steel scrape into small pieces; 4.Not too much carbon. If the steel scrape is with high carbon content, decaburization will be needed, which will increase cost and affect the service life of furnace lining . There have many kinds of refractory products in our factory. When you need any refractory products, welcome to view our factory anytime. Article source: How can you tell the quality of steel scrape?