Typical dry vibrating material performance

 

Tundish dry vibrating materials can be constructed on-site by two methods, direct vibration and indirect vibration, to obtain a uniform and dense overall structure. The direct vibration method uses a vibrator to directly vibrate the refractory material. After a layer of refractory material is fully vibrated by the vibrator, the surface of the refractory material is raked, filled with a new layer of material, and then fully vibrated by the vibrator. This is done layer by layer until the construction is completed. During construction, delamination between layers should be avoided. Indirect vibration is the vibration force generated by the vibrator fixed on the inner or outer mold is transmitted to the dry vibrating mix through the template, so as to make it dense.

Wanhao is a manufacturer who is specialized in designing various kinds of furnace and making refractory products for electric furnace, ladle, tundish, blast furnace, AOD furnace, IF furnace, etc.

Article Source:Typical dry vibrating material performance

More Refractory Products: http://www.wanhaorefractory.com/en/product.html

Website: http://www.wanhaorefractory.com/


 

 

评论

发表评论

此博客中的热门博文

Advantages and disadvantages of fire clay brick

图片
According to production process, fire clay brick is divided into machine made brick and handmade brick. According to structures, fire clay brick is divided into solid brick and hollow brick, and hollow brick can be divided into load-bearing brick and nonbearing brick. Fire clay brick is made at different shapes according to different using requirements. Advantages of fire clay brick： 1. Fire clay brick is environmentally friendly and belongs to resource recycling bricks, so we can rest assured use fire clay brick. Fire clay bricks won’t be harmful to our health. 2.Fire clay brick has advantages of fireproof and heat insulation. Used clay brick can be used as concrete so that to save a lot of resources. 3.The price of fire clay brick is not as expensive as that of other fire bricks. Light weight brick is more expensive than fire clay brick. Besides, fire clay brick is very cheap and very durable 4. Fire clay brick has good moisture-proof function, it also has the a...
阅读全文

Installation of ladle slide gate and nozzle

图片
1.Before installing the upper steel ladle, first check the use of the water block brick. When the pit or crack occurs, use the repair refractory material to repair it, and then proceed to the next step. 2. Take the water pipe test, check the gap between the nozzle brick and the brick and the positioning of the nozzle brick. It is forbidden to manually remove the head of the water inlet and install it. 3. After checking the appropriate, remove the nozzle brick and apply refractory mud evenly on the outer wall of the upper nozzle brick. The thickness of the refractory mud is controlled at about 10mm (according to the actual clearance). When the gap between the nozzle and the brick is large, the asbestos cloth can be used. The head of the nozzle is evenly wound separately. 4. When installing the water inlet, the nozzle brick should be smoothly fed into the brick. During operation, avoid the gap in the lower part of the nozzle brick. 5. The water inlet must be re...
阅读全文

Blast furnace accident: six reasons for the freezing of the hearth

图片
1. The furnace is out of order. In many cases, the blast furnace condition is abnormal due to poor quality of the raw fuel or improper basic operating system. 2. Operational errors The prelude to the freezing of the hearth is the furnace cool. It is normal for the blast furnace temperature to fluctuate within a certain range, and the cool furnace that causes the hearth to freeze is often caused by improper operation. 3.A large amount of cooling water leaks into the hearth. 4. Long-term rest or sealing furnace Long-term rest is a common cause of freezing of the hearth even if there is no water leakage from the cooling equipment. 5. Equipment accident If the test is not enough before the start of the furnace, it will often cause equipment accidents. 6. The quality of raw fuel deteriorates. Wanhao is a manufacturer who is specialized in designing various kinds of furnace and making refractory products for electric furnace, ladle, tundish, bla...
阅读全文