The feature of high alumina Brick

Alumina brick is a kind of refractory material. The main component of high alumina brick is Al2O3. High alumina brick is a alumina trioxide (Al2O3) content higher than 48% alumina silicate refractory products. It is made from bauxite or other refractory raw materials with high content of alumina through forming and calcining with thermal stability, high refractoriness in more than 1770 ℃. High alumina brick has good slag resistance and is used for lining of steel making electric furnace, glass furnace and cement rotary furnace.

Wanhao is a manufacturer who is specialized in designing various kinds of furnace and making refractory products for electric furnace, ladle, tundish, blast furnace, AOD furnace, IF furnace, etc.

Article Source:The feature of high alumina Brick
Company name：Wanhao Refractory
Email:sales100@wanhaorefractory.com
Website: http://www.wanhaorefractory.com/

评论

发表评论

此博客中的热门博文

Steel demand will grow at a low rate

图片
  The recovery of steel demand in developing economies (excluding China) faces more challenges as the impact of the COVID-19 pandemic persists and inflation, and as a result, many emerging economies enter a tightening monetary cycle. Steel demand in developing economies (excluding China) increased by 10.7% in 2021 after falling by 7.7% in 2020, a figure slightly higher than the World Steel Association forecast. In 2022 and 2023, developing economies (excluding China) will continue to face challenges posed by the deteriorating external environment, the conflict between Russia and Ukraine, and the tightening of monetary policy in the United States, which will lead to developing economies (excluding China) steel Demand has grown at a low speed in the past two years, and is expected to grow by 0.5% and 4.5% respectively. Wanhao is a manufacturer who is specialized in designing various kinds of furnace and making refractory products for electric furnace, ladle, tundish, bla...
阅读全文

The function of the continuous casting tundish

The continuous casting tundish was originally used for the heat preservation of molten steel, and its main purpose was to distribute and rectify molten steel. With the successful development of technologies such as slow cooling of molten steel, molten steel reheating technology, argon gas sealing technology, gas stirring technology and removal of non-metallic inclusions in molten steel, continuous casting tundish have become the most important part of the final stage of the steel smelting process. The main refining vessel is developing to a large scale. 1 Purification function To produce high-purity clean steel, install porous air-permeable bricks at the bottom of the tundish or embed porous tubular gas distributors between the working layer and permanent layer, or install porous bricks on the slag retaining wall to blow argon to make argon bubbles. Float evenly from the bottom to promote the removal of inclusions. These devices can eliminate the hydrogenation o...
阅读全文

Specific analysis of the air permeability of ladle purging plug

图片
  Ladle purging plug is a kind of functional refractory material with long life, energy saving, consumption reduction and emission reduction. It is made by firing high-purity raw materials. It has the advantages of high blow-through rate, corrosion resistance, thermal vibration resistance, safety and reliability, and long life. P urging plug is used in the out-of-furnace refining of ferrous metals and the smelting of non-ferrous metals. 1.The influence of smelting conditions on the air permeability of ventilating bricks The greater the degree of overheating, the lower the viscosity, surface tension, and wetting angle of the molten steel, the greater the tendency to seep steel, and the lower the ladle blow-through rate. Some research materials have introduced: when the carbon in the iron-carbon melt is 0.15% and 0.40%, the surface tension appears the minimum and the maximum, reducing the content of the non-metallic elements sulfur and oxygen of the steel grade can si...
阅读全文