Corundum Castable

Corundum castable is a refractory product with Al2O3 content of more than 90% and corundum as its main crystal phase. It is compounded with proper dispersing agent, coagulant, stainless steel fiber and compounded by strict formula It has the characteristics of high temperature, good strength, wear resistance, erosion resistance, high thermal conductivity, thermal shock resistance, corrosion resistance, good sealing, quick setting, etc.


Wanhao is a manufacturer who is specialized in designing various kinds of furnace and making refractory products for electric furnace, ladle, tundish, blast furnace, AOD furnace, IF furnace, etc.


Company name: Wanhao Refractory
Email:sales100@wanhaorefractory.com
Website:http://www.wanhaorefractory.com/

评论

发表评论

此博客中的热门博文

Specific analysis of the air permeability of ladle purging plug

图片
  Ladle purging plug is a kind of functional refractory material with long life, energy saving, consumption reduction and emission reduction. It is made by firing high-purity raw materials. It has the advantages of high blow-through rate, corrosion resistance, thermal vibration resistance, safety and reliability, and long life. P urging plug is used in the out-of-furnace refining of ferrous metals and the smelting of non-ferrous metals. 1.The influence of smelting conditions on the air permeability of ventilating bricks The greater the degree of overheating, the lower the viscosity, surface tension, and wetting angle of the molten steel, the greater the tendency to seep steel, and the lower the ladle blow-through rate. Some research materials have introduced: when the carbon in the iron-carbon melt is 0.15% and 0.40%, the surface tension appears the minimum and the maximum, reducing the content of the non-metallic elements sulfur and oxygen of the steel grade can si...
阅读全文

Introduction and selection of burner bricks

图片
  Burner brick is a kind of refractory brick used with the burner of high temperature kiln, such as blast furnace gas burner, special burner for lime furnace kiln, shaft furnace burner, regenerative heating furnace burner, etc. The shapes are different, and the burner bricks used do not have fixed specifications and sizes, and they often need to be customized in refractory manufacturers. The use of high-aluminum steel fiber castables can meet the working conditions of most burners. The function of the burner brick is: 1.The fuel is heated to the ignition temperature in the burner brick, so that it is easy to ignite and burn quickly. 2.Keep a certain high temperature in the burner brick to stabilize the combustion process and avoid pulsation or fuel interruption. 3.The flame shape of the organization meets the requirements of the heating process. 4.To further mix the fuel and air. Therefore, the burner brick is an indispensable high-temperature resistant material for ...
阅读全文

The function of the continuous casting tundish

The continuous casting tundish was originally used for the heat preservation of molten steel, and its main purpose was to distribute and rectify molten steel. With the successful development of technologies such as slow cooling of molten steel, molten steel reheating technology, argon gas sealing technology, gas stirring technology and removal of non-metallic inclusions in molten steel, continuous casting tundish have become the most important part of the final stage of the steel smelting process. The main refining vessel is developing to a large scale. 1 Purification function To produce high-purity clean steel, install porous air-permeable bricks at the bottom of the tundish or embed porous tubular gas distributors between the working layer and permanent layer, or install porous bricks on the slag retaining wall to blow argon to make argon bubbles. Float evenly from the bottom to promote the removal of inclusions. These devices can eliminate the hydrogenation o...
阅读全文