The main factors that affect the use performance of magnesium-calcium brick

The main factors affect the performance of magnesia carbon bricks include MgO / CaO ratio, chemical purity and density etc.
The MgO / CaO ratio of magnesia carbon bricks can increase high temperature resistance, chemical erosion resistance of slag,high temperature corrosion resistance and hydration resistance. But it will decrease the magnesia carbon brick’s spalling resistance, resistance to the slag penetration and molten steel purification performance.
Adding some additives in the production of magnesia carbon bricks can improve some performances of the magnesia carbon bricks.
Add appropriate amount of ZrO2 can improve the performance of spalling resistance,  high temperature corrosion resistance and hydration resistance of the magnesia carbon brick. ZrO2 is called the "multi-functional" additives of magnesia carbon brick.
At Abroad, eye bricks of AOD furnace generally use high-purity, high density sintered magnesia dolomite brick with 1% content of ZrO2 with favorable results. 
 Article Source: magnesia carbon bricks
Company name: Wanhao Refractory
Email:sales100@wanhaorefractory.com
Website:http://www.wanhaorefractory.com/

评论

发表评论

此博客中的热门博文

Specific analysis of the air permeability of ladle purging plug

图片
  Ladle purging plug is a kind of functional refractory material with long life, energy saving, consumption reduction and emission reduction. It is made by firing high-purity raw materials. It has the advantages of high blow-through rate, corrosion resistance, thermal vibration resistance, safety and reliability, and long life. P urging plug is used in the out-of-furnace refining of ferrous metals and the smelting of non-ferrous metals. 1.The influence of smelting conditions on the air permeability of ventilating bricks The greater the degree of overheating, the lower the viscosity, surface tension, and wetting angle of the molten steel, the greater the tendency to seep steel, and the lower the ladle blow-through rate. Some research materials have introduced: when the carbon in the iron-carbon melt is 0.15% and 0.40%, the surface tension appears the minimum and the maximum, reducing the content of the non-metallic elements sulfur and oxygen of the steel grade can si...
阅读全文

Introduction and selection of burner bricks

图片
  Burner brick is a kind of refractory brick used with the burner of high temperature kiln, such as blast furnace gas burner, special burner for lime furnace kiln, shaft furnace burner, regenerative heating furnace burner, etc. The shapes are different, and the burner bricks used do not have fixed specifications and sizes, and they often need to be customized in refractory manufacturers. The use of high-aluminum steel fiber castables can meet the working conditions of most burners. The function of the burner brick is: 1.The fuel is heated to the ignition temperature in the burner brick, so that it is easy to ignite and burn quickly. 2.Keep a certain high temperature in the burner brick to stabilize the combustion process and avoid pulsation or fuel interruption. 3.The flame shape of the organization meets the requirements of the heating process. 4.To further mix the fuel and air. Therefore, the burner brick is an indispensable high-temperature resistant material for ...
阅读全文

Steel demand will grow at a low rate

图片
  The recovery of steel demand in developing economies (excluding China) faces more challenges as the impact of the COVID-19 pandemic persists and inflation, and as a result, many emerging economies enter a tightening monetary cycle. Steel demand in developing economies (excluding China) increased by 10.7% in 2021 after falling by 7.7% in 2020, a figure slightly higher than the World Steel Association forecast. In 2022 and 2023, developing economies (excluding China) will continue to face challenges posed by the deteriorating external environment, the conflict between Russia and Ukraine, and the tightening of monetary policy in the United States, which will lead to developing economies (excluding China) steel Demand has grown at a low speed in the past two years, and is expected to grow by 0.5% and 4.5% respectively. Wanhao is a manufacturer who is specialized in designing various kinds of furnace and making refractory products for electric furnace, ladle, tundish, bla...
阅读全文